Advantages & Technical information 

First of All      
Warm Start, increases the life time of the lamps        
Easy wiring, 2 wires per lamp to the EB10 Electronic Ballast
Lifetime of 5.000 burning hours by experience

Advanced
A weight of only 2,5 Kg for 10 lamps, in a machine with 50 lamps only 12,5Kg
Output adjustable from 60% to 120%. (depending on the lamp)
Lamp range from 80Watt to 200Watt.·        
Savings on power 15% to 25% by efficient use of components and temperature        
Equal UV-radiation in the top, middle and low side of UV-lamps in a vertical
UvA and UvB go down Lineair at the aging of the lamp or by dimming facility        
Watchdog, 30 minutes automatic switch off
No more flickering
Less blacking   
No peak currency at start-up
Less heat, Less Cabling Less labour to complete a machine
Replaces conventional ballast, capacitors and starter 
Output calibration moment at changing of the lamps by salon owners
Extended warranty program

Further
The EB-10 starts at 75Khz and goes down  to 25Khz    
Operating temperature +/- 350 tot 450 Celsius  
Max operating temperature 800 Celsius, before automatic switch off     
Connection 230Vac
6 LED-indicators 1 per channel and 1 for power
Bus system for a maximum of 8 units in a bus       
Inepro Bus Controller RS422 for central dimming by a switch        
Inepro Bus Controller for connection UV Sensors and calibration        
Inepro Bus Controller RS232 to connect to a PC for central dimming        
Various lamp types on 1 EB10, e.g. 6 x 100Watt lamps and 4 x 180Watt lamps 

Filter:
We advise a filter in the solarium for EMC purposes.
Filter type Shaffner FN256-25-47 3 phase, 25Amp.